|
Hi to all, this is my first post in the forum; i have this printer Xerox Phaser 6130, i really regret buying this thing, supplies were killing my pocket, some time ago i found refilling kits (chip+toner bottle), and some days ago i came across this proyect http://code.google.com/p/xeroxpatrone/ so i would be able to save on buying the chip for every cartridge reprograming them myself but its really not working for me, i used the schematics for the Easy pc adapter but couldnt get it to work, then i found the scheematics in Printer guide on this site, and get to read the nvram of the eeprom but couldnt get it to write, first i used the precompiled i've downloaded from xeroxpatrone proyect and was able to read an dump eeprom content to a file (for testing purpose, as cartrigde is allready empty), then i went to write one of the dumps i found on the same website and apparently wrote fine as i get a message window "wrote 256 bytes", then i press read again an oh! surprise, just read 0's, then i tried pony prog 2000, as eeprom was allready empty when i press read just get 0´s and when i press wrtite get "write error" message, this is what im using, windows xp, the serial adapter i mentioned above, precompiled program "xeroxpatrone" and ponyprog 2000 2.07c beta, eeprom ST24C02WP (could't find datasheet), i hope someone can point me in the right direction, thanks.
Alex from México. |
